Used Geminis GHT5 G2 1000X5000 CNC Lathe
Other available CNC Lathes
Mori Seiki NLX 2500SY/700
Mori Seiki turning center new in 2011 C axis in spindle and sub spindle. Y Axis Maximum swing over bed: 590 mm. Driven Tools. High precision refrigeration Bar feeder and part
DAEWOO PUMA 2000-SY
New in 2003 with CNC FANUC 18i – T Max swing over bed/ carriage: 600/550 mm. Y Axis Travel: 100 (±50) mm. B Axis Travel: 580 mm. C axis 0.001º Driven turret positions
GURUTZPE 4G A-1200 x 5000
Manufactured in 2008 with SIEMENS 840 D CNC Distance between centers: 5,000 mm Max swing on bed/carriage: 1,170/950 mm. No. of support guides: 4 SAUTER turret 0.5.320.032, 4
Gurutzpe A1600 CNC 2G x 4000
Fabricado en 2008 con FAGOR 8055 TC Distancia entre puntos :4.000 mm. Eje C y herramientas motorizadas. Eje Y Tipo torreta Sauter 4 POS Contrapunto con movimiento longitudinal por CNC Muy
MORI SEIKI NT 4250-DCG 1500S
Second-hand turning and milling center New in 2008 with MSX-701 III CNC Spindle 1, spindle 2 and too spindle C axis in Spindle 1 and 2 Y Axis. Hydraulic steady rest SMW Autoblock
Technical Features of this Second Hand CNC Lathe
| New in | 2006 |
| CNC | Fanuc 21i TB |
| Max. Swing Over Bed Ø | 1.000 mm. |
| Max. Swing Ø | 1.000 mm. |
| Max Swing Over Cross Slide Ø | 680 mm. |
| Distance Between Centres | 5.000 mm. |
| Rapid Feed X, Z Axis | 8 m/min |
| Turning Speeds | 0-1400 rpm |
| Spindle Automatic Ranges | 2 Gamas/ Ranges |
| Main Spindle Motor Power | 37 Kw. |
| Spindle Nose | DIN-55026-B11 |
| Turret Positions | 8 posiciones/ positions |
| Turret Type | VDI 50 (Ø 470 mm) |
| C Axis and Driven Tools | INCLUDED |
| Chuck with 4 Independent Hard Jaws Ø900 mm. | INCLUDED |
| Autocentering Chuck with 3 Hard Jaws Ø 450 mm | INCLUDED |
| Steady Rest 3 Supports Ø 680 mm | INCLUDED |
| Steady Rest 3 Supports Ø 680 mm | INCLUDED |
| Steady Rest 3 Supports Ø 680 mm | INCLUDED |
| 1 Axial Driven Toolholders | INCLUDED |
| 2 Radial Driven Toolholders | INCLUDED |
| 25 VDI Toolholders | INCLUDED |
| Back support for boring tool | INCLUDED |
| Chuck Protection | INCLUDED |
| Complete Rear Protection | INCLUDED |
| Longitudinal Chip Conveyor | INCLUDED |
| Quill Travel | 104 mm. |
| Ø Tailstock Quill | 140 mm |
| Tailstock Quill Traverse | 300 mm |
| Max.Weight Between Centres (1 Steady) | 6.200 Kg. |
| Piece Max. Weight Between Centres | 4.800 Kg. |
| Machine Weight | 15 Tn. |
| Total Power Required | 45 KW. |
Detailed information of this Second Hand CNC Lathe
ALL THE MACHINES ARE AVAILABLE SUBJECT TO PRIOR SALE
Technical specifications are not binding and may be modified without notice
